Forehead Measurement - Beurer FT 95 Mode D'emploi

8. Forehead measurement

Beurer tip
Remember:
• Physical activity, increased perspiration on the forehead, taking vasoconstrictive medi-
cation and skin irritations can distort the measurement.
• The forehead, or the temples, must be free from perspiration and cosmetics.
• We recommend that you take three measurements on the forehead. If the three meas-
urements are different, use the highest value.
• If the forehead area is covered in hair, sweat or dirt, clean the area and then wait for
10 minutes to improve the precision of the measurement.
• It is important that you keep the thermometer still during measurement. Moving the ther-
mometer during measurement may cause imprecise measurements.
• To switch on the thermometer, briefly press the
brief self-test and two short beeps the device is ready for fore-
head temperature measurement
perature mode. You can tell this from the
button. A
. The device is in forehead tem-
symbol on the display.
47
fter a
Fig. 10