Nanosonics trophon 2 Mode D'emploi page 26

10. Liquid is leaking from the
trophon2.
11. The trophon2 is failing
multiple cycles.
12. The trophon2 takes too long
to warm up between cycles
L03072 2.0 04/2020
WARNING: Any fluid leaking from the trophon2 may
contain hydrogen peroxide.
If liquid or mist is seen coming from the trophon2 at any time:
1. Do not come into contact with the mist or liquid.
2. Wear appropriate PPE.
3. Ensure area is well ventilated.
4. Allow the trophon2 to complete the cycle.
5. Turn off the trophon2 and remove the power cord.
6. Contact your customer service representative.
7. Consult the Safety Data Sheet.
Record any error codes and colour of the Chemical Indicator
•
and contact your customer service representative.
Ensure that the probe is removed promptly at the end of each
•
cycle.
24