Nanosonics trophon 2 Mode D'emploi page 16

The trophon2 AcuTrace Reader is located on the device as shown:
AcuTrace compatible products that are embedded with an RFID chip can be
identified by this symbol:
Scan the symbol on the AcuTrace reader when prompted.
Products that are AcuTrace compatible have this symbol on the outer packaging:
This symbol cannot be read by the AcuTrace reader.
The following products are compatible with AcuTrace:
trophon AcuTrace Operator Card
trophon AcuTrace Operator Card links the HLD cycle to the operator responsible for various aspects
of the workflow. The trophon2 screen will prompt the operator to scan their Operator Card against the
AcuTrace reader when preparing a probe for disinfection.
trophon AcuTrace Medical Instrument Tag
trophon AcuTrace Medical Instrument Tag stores probe identification information. Attach the trophon
AcuTrace Medical Instrument Tag at a distance from the probe that will not interfere with the patient
exam or closing of the trophon door. The tag is scanned on the AcuTrace reader when prompted by
an on screen message, prior to HLD, to link the HLD cycle to the disinfected probe.
trophon Chemical Indicator and Disinfectant
The AcuTrace compatible trophon Chemical Indicator box and disinfectant cartridges can be scanned
by the AcuTrace reader to track batch and expiry dates of these products.
Refer to each product Instruction for Use (IFU) for more information on their AcuTrace
capability and how to programme
L03072 2.0 04/2020
14