HP Business Inkjet 1200 Serie Guide De Mise En Marche page 19

Configuration page button is blue.
Power light is on.
Power light is on. Out of Paper light blinks.
Resume light blinks.
Power light is on. Paper Jam light blinks.
Resume light blinks.
Power light is on. Door Open light is on.
Power light is on. Door Open light blinks.
Power light is on. Printhead light is on.
The Power light, the Ink Cartridge light, and one or
more of the color indicator lights are on.
Power light is on. Printhead light and appropriate color
indicator light blink.
The Power light, the Printhead light, and one or more of
the color indicator lights are on.
The printer is connected to a wireless network. It is turned on and idle.
No action is required.
The printer is out of paper.
Load paper in the printer, and then press
Paper is jammed in the printer.
Clear the paper jam, and then press
For more information, see the "Maintaining and troubleshooting" chapter in the
onscreen user's guide."
A cover is not closed completely.
Make sure all covers are completely closed.
The rear-access panel or the auto-duplex unit is not inserted completely.
Make sure the rear-access panel (HP Business Inkjet 1200) or the auto-duplex unit
(HP Business Inkjet 1200d/1200dn/1200dtn/1200dtwn) is inserted completely in
the back of the printer.
The printhead latch is not secured properly.
Open the top cover and press down firmly on the printhead latch to ensure that it is
secured properly. Also, make sure the protective tape on each printhead has been
removed.
One or more of the ink cartridges is missing.
Install the ink cartridges and try to print.
If the error persists, replace the ink cartridge or cartridges indicated.
One or more of the printheads needs attention.
Reinstall the printheads and try to print.
Try cleaning the printhead contacts. See Maintaining the printheads.
If the error persists, replace the printhead or printheads indicated.
One or more of the printheads is missing.
Make sure that the protective tape on the printhead has been removed.
Reinstall the printheads and try to print.
18
(Resume button) to continue.
(Resume button) to continue.