Panasonic PV-GS400 Mode D'emploi page 85

PV-GS400Eng.book 85 ページ ２００４年６月４日 金曜日 午後３時１７分
ª LCD Monitor/Viewfinder/Lens Hood
LCD Monitor
≥In a place with drastic temperature changes,
condensation may form on the LCD Monitor.
Wipe it with soft dry cloth.
≥If your Camcorder is extremely cold when you
turn its power on, the image on the LCD Monitor
is slightly darker than usual at first. However, as
the internal temperature increases, it goes back
to the normal brightness.
Extremely high precision technology is
employed to produce the LCD Monitor
screen featuring a total of approximately
200,000 pixels. The result is more than
99.99% effective pixels with a mere 0.01% of
the pixels inactive or always lit. However,
this is not a malfunction and does not affect
the recorded picture.
Viewfinder
≥Do not direct the Viewfinder or Lens at the sun.
Internal components may be seriously
damaged.
≥To clean the inside of the Viewfinder, keep
pressing 1 while holding the Eyecup 2 and
pull it out.
2
Extremely high precision technology is
employed to produce the Viewfinder screen
featuring a total of approximately
123,000 pixels. The result is more than
99.99% effective pixels with a mere 0.01% of
the pixels inactive or always lit. However,
this is not a malfunction and does not affect
the recorded picture.
Others
Lens Hood
≥When attaching the ND Filter or MC Protector of
the Filter Kit (not supplied), attach it on the
inside of the Lens Hood without removing the
Lens Hood.
≥Attach the MC Protector (not supplied) or the
ND Filter (not supplied) on the Lens Hood.
≥Do not attach anything other than the MC
Protector (not supplied) or the ND Filter (not
supplied) to the Lens Hood.
≥When you wish to attach the Tele Conversion
Lens (not supplied) or Wide Conversion Lens
(not supplied), first of all, turn the Lens Hood
counterclockwise and take it off. Then attach the
conversion lens by turning it clockwise. When
you attach the Lens Hood back, insert 1 into
the slot 2 and turn it clockwise.
≥If you push the [W/T] Lever toward [W] during
recording with the filter and conversion lens
attached together to the Camcorder, 4 corners
of the image may become dark (vignetting). For
details, please refer to the operating instructions
of your accessories.
≥Be sure to keep the Lens Hood attached to the
1
Camcorder so as to shut out unnecessary light.
2 1
85