Panasonic PV-GS400 Mode D'emploi page 80

PV-GS400Eng.book 80 ページ ２００４年６月４日 金曜日 午後３時１７分
≥If you dub a tape recorded at [12bit] selected as
the [AUDIO REC] on the [RECORDING]
Sub-Menu, playback sound becomes stereo
sound regardless of the [AUDIO OUT] setting if
[12bit AUDIO] is set to [MIX].
ª Index Search Function
≥Index Search may not be possible at the
beginning of the tape.
≥Scene Index Search may not function properly if
the interval between 2 scene index signals is
less than 1 minute.
ª Playback Zoom Function
≥You cannot adjust the sound volume with the
Remote Controller in Playback Zoom Mode.
≥If you turn off the Camcorder power or if you
operate the Mode Dial, Playback Zoom Mode is
automatically cancelled.
≥Even if Playback Zoom Functions are being
used, images that are output from the DV
Terminal ( ) are not enlarged.
-14-
≥As you enlarge an image, the quality of the
image deteriorates.
≥During Playback Zoom, the Variable Speed
Search Function cannot be changed with the
Remote Controller.
ª Playback Digital Effect Functions
≥Signals of images to which digital effects are
added during playback cannot be output from
the DV Terminal ( ).
-14-
≥You cannot use the Wipe or Mix Function while
playing back the non-recorded portion of tape.
ª Playing Back a Card
≥The file format supported by this Camcorder is
JPEG. (Not all JPEG formatted files will be
played back.)
≥If a blank (nothing recorded) Card is played, the
screen becomes white.
≥If you attempt to play back a file recorded in a
different format or if file data is defective, the
whole display becomes bluish and the
[UNPLAYABLE CARD] Indicator may appear as
warning.
≥When playing back a picture recorded on other
equipment, its size and that of this Camcorder
may appear differently.
≥When playing back a picture recorded on other
equipment, the picture may not be played back
or the quality of pictures may be reduced.
≥When playing back a non standardized file, the
Folder File Number may not be displayed.
≥When changing the picture size to 640k480
with PC, black bars may appear, depending on
the playback device.
80
Others
ª Slide Show
≥Playback time may take longer than usual
depending on the picture.
ª Creating a Title
≥If the [PICTURE SIZE] is set to a size other than
[640k480], a title cannot be created.
≥Even if the contrast of the Title is adjusted, the
portions where there is little difference between
light and dark and where the boundary between
light and dark is unclear may not appear.
≥The Title may not appear well if something small
is used for it.
≥If titles are created, the number of images that
can be recorded on a Card decreases.
≥If the number of images that can be recorded on
a Card is small, you may not be able to create a
title.
ª Adding a Title
≥The Title In Function and Digital Effects cannot
be used simultaneously.
≥The Title In Function and RapidFire
Consecutive Photoshot cannot be used
simultaneously.
≥When a title is displayed in Tape Playback
Mode, the title is not output from the DV
Terminal.
≥The Multi-Picture Mode cannot be used once
the title is inserted.
≥A full-colored title made on other equipment
cannot be played back or added to the picture
with this Camcorder.
≥A title with size other than 640k480 pixels
cannot be displayed.
≥When the title or the Multi screen is displayed,
recording and playback cannot be performed.
≥During external input or DV input, you cannot
use Title In Function or display titles on the Multi
screen. Select the desired titles to display them
on the screen before connecting the cable to the
Camcorder.
ª DPOF
≥Perform the DPOF Settings with your
Camcorder.
≥Verifying the DPOF Settings may take a little
time. Wait until the [ACCESS] Lamp goes out.
ª Lock Setting
≥The Lock Setting carried out by this Camcorder
is only effective for this Camcorder.
≥The SD Memory Card has a write protection
switch on it. If the switch is moved to the [LOCK]
side, you cannot write to or format the Card. If it
is moved back, you can.