Connecting Computer And Camcorder; Using As A Web Camera - Panasonic PV-GS400 Mode D'emploi

PV-GS400Eng.book 59 ページ ２００４年６月４日 金曜日 午後３時１７分
≥A message indicating a conflict between
versions may be displayed during the
installation. This will not cause a problem.
Simply click [Yes] to proceed with the
installation.
Connecting Computer and
Camcorder
When your OS is Windows 98SE, install USB
Driver before connecting.
Never connect the USB Connecting Cable
until the USB Driver is installed.
Before making these connections, turn off all
devices which are to be connected.
≥When using the USB Connection Kit, it is
recommended that you use the AC Adaptor as
the power supply of the Camcorder.
ª For Using Built-in SD Drive
By connecting the Camcorder and personal
computer with the USB Cable, you can transfer
still images saved on a Memory Card directly to
your personal computer.
1
Insert the Memory Card into the Camcorder.
2
Set the Camcorder to PC Mode.
3
Connect the Camcorder to your personal
computer with the USB Cable.
≥It enters PC Connecting Mode.
4
Open [My Computer] and click
[Removable Disk] (For Windows 98SE/Me/
2000 users).
Click [Open folder to view files using
Windows Explorer] and then [OK] (For
Windows XP users).
≥You can view images stored on the Memory
Card and also save them to your hard disk.
≥Please do not change file or folder names on
the personal computer. The images on the
Memory Card may then not be viewable on
the Camcorder.
≥After making the connections, turn the
connected equipment on.
With a PC
≥Appropriate driver to recognize Camcorder is
automatically installed by Windows Plug and
Play when connected for the first time.
≥After the USB Driver is installed and USB
Connection Cable is connected to the
Camcorder, open [My Computer] or
[Windows Explorer] to check that the drive is
displayed as a removable disk drive (only when
card is inserted into the Camcorder). It enables
you to operate it in the same way as a floppy
disk drive, and you can use the same drag and
drop or copy methods.

Using as a Web Camera

If the Camcorder is connected to your personal
computer, you can send video and sound from
the Camcorder to other parties via the network.
(You can use the microphone equipped with the
personal computer instead of the one on the
Camcorder.)
Note:
≥Do not connect the USB Cable until the Video
Stream Driver is installed.
This feature can be used only if both parties
are using the same operating system. Please
see chart below:
[Send]
<OK> Windows XP
Windows XP
<NG> Windows
Windows XP
<OK> Windows
Windows
98SE/Me/
2000
ª Operating environment
OS:
IBM PC/AT compatible personal computer with
preinstalled
Microsoft Windows XP Home Edition/
Professional SP1 or later
Microsoft Windows 2000 Professional SP4 or
later
Microsoft Windows Me (Millennium Edition)
Microsoft Windows 98 Second Edition
CPU:
Intel Pentium III 450 MHz or higher
Celeron 400 MHz or higher (including compatible
CPU)
RAM:
128 MB or more (256 MB or more recommended)
Free hard disk space:
250 MB or more
Interface:
USB
[Receive] [Software]
Windows
Messenger
98SE/Me/
2000
MSN
98SE/Me/ Messenger
2000
59