Sony MFM-HT75W Mode D'emploi page 782

Masquer les pouces Voir aussi pour MFM-HT75W:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 677
If you still need to make further adjustments to the picture
quality
You can manually adjust the picture's sharpness (phase/pitch) and
position (horizontal/vertical position).
These adjustments are stored in memory and automatically
recalled when the display receives a previously input and
registered input signal.
x Making further automatic adjustments to
the picture quality for the current input
signal (Auto Adjust) (for PC 2 only)
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
press the OK button.
The "Screen" menu appears on the screen.
3 Press the M/m buttons to select "Auto Adjust" and
press the OK button.
Make the appropriate adjustments of the screen's phase, pitch
and horizontal/vertical position for the current input signal
and store them.
x Adjusting the picture's sharpness manually
(Phase/Pitch) (for PC 2 only)
You can adjust the picture's sharpness as follows.
1 Set the resolution to 1280 × 768 (MFM-HT75W), or
1280 × 1024 (MFM-HT95) on the computer.
2 Load the CD-ROM.
3 Start the CD-ROM, select the area and model, and
display the test pattern.
For Windows
Click [Utility] t [Windows]/[Win Utility.exe].
For Macintosh
Click [Utility] t [Mac]/[Mac Utility].
4 Press the MENU button.
The main menu appears on the screen.
5 Press the M/m buttons to select
press the OK button.
The "Screen" menu appears on the screen.
6 Press the M/m buttons to select "Phase" and press
the OK button.
The "Phase" adjustment menu appears on the screen.
7 Press the M/m buttons until the horizontal stripes
are at a minimum.
Adjust so that the horizontal stripes are at a minimum.
26
8 Press the OK button.
The main menu appears on the screen.
If vertical stripes are observed over the entire screen, adjust
the pitch using the following procedures.
9 Press the M/m buttons to select "Pitch" and press
the OK button.
The "Pitch" adjustment menu appears on the screen.
10 Press the M/m buttons until the vertical stripes
disappear.
Adjust so that the vertical stripes disappear.
(Screen) and
11 Click [END] on the screen to turn off the test pattern.
x Adjusting the picture's position manually
(H Center /V Center) (for PC 2 only)
If the picture is not in the center of the screen, adjust the picture's
centering as follows.
1 Set the resolution to 1280 × 768 (MFM-HT75W), or
1280 × 1024 (MFM-HT95) on the computer.
2 Load the CD-ROM.
3 Start the CD-ROM, select the area and model, and
display the test pattern.
For Windows
Click [Utility] t [Windows]/[Win Utility.exe].
For Macintosh
Click [Utility] t [Mac]/[Mac Utility].
4 Press the MENU button.
The main menu appears on the screen.
5 Press the M/m buttons to select
press the OK button.
The "Screen" menu appears on the screen.
(Screen) and
6 Press the M/m buttons to select "H Center" or "V
Center" and press the OK button.
The "H Center" adjustment menu or "V Center" adjustment
menu appears on the screen.
7 Press the M/m buttons to center the test pattern on
the screen.
8 Click [END] on the screen to turn off the test pattern.
(Screen) and

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mfm-ht95

Table des Matières