Sony MFM-HT75W Mode D'emploi page 803

To connect to an IBM PC/AT or compatible computer
audio cord (supplied)
IBM PC/AT
or compatible
to the audio output
computer
of the computer
to the computer's HD15
output connector (analog
RGB)
To connect to a Macintosh computer
to the audio output
of the computer
to the computer's
output connector
Macintosh
When connecting a Macintosh computer, use an adapter (not supplied),
if necessary. Connect the adapter to the computer before connecting the
video signal cable.
10
to the
audio input to the HD15
for PC 2 input
HD15-HD15 video
signal cable (analog
RGB) (supplied)
to the
to the HD15
audio input
input
for PC 2
audio cord
(supplied)
HD15-HD15
video signal
cable (analog
RGB)
(supplied)
x Connecting video equipment using the
VIDEO 1 jacks
If you intend to connect video equipment that has component
video output jacks, such as a DVD player, follow the instructions
below.
Using a video signal cable (not supplied) and an audio
cord (not supplied), connect the video equipment to the
display's VIDEO 1 jacks.
rear of the display
audio-L
(white)
audio-R
(red)
DVD player
audio cord (not
supplied)
Y
P
B
P
R
component
video cable
(not supplied)