Sony MFM-HT75W Mode D'emploi page 525

Remote control
8
9
0
PC1 PC2
TV
qa
1
4
7
qs
2
qd
DISPLAY
A 1 (power) switch (page 12)
Press to turn the display on or off.
B Input select buttons
PC 1 (page 9): Press to select a signal input through
the PC 1 connectors (DVI-D) on the
rear.
PC 2 (page 9): Press to select a signal input through
the PC 2 connectors (HD15) on the
rear.
VIDEO 1 (page 10):Press to select a signal input through
the VIDEO 1 jacks (Y/P
Component) on the rear.
VIDEO 2 (page 11):Press to select a signal input through
the VIDEO 2 jacks (composite/S
video) on the rear.
TV (page 14): Press to select the TV input.
8
1
1
2
VIDEO1 VIDEO2
3
MENU
4
OK
2 3
5
5 6
8 9
6
0
ENT
PROG
7
/P
B R
C Feature buttons
(PinP)/ (reveal/conceal) (page 26):
Press repeatedly to step through the
"PIP" Settings.
(Zoom)/ (page hold) (page 24):
Press repeatedly to step through the
"Zoom" settings.
(Teletext) (page 33):
Press to turn on or off the Teletext
mode.
D MENU button (page 17)
Press to turn the menu screen on and off.
E 0-9 buttons (page 14)
Use these buttons to input numbers.
F ENT (enter) button (page 14)
Press to confirm the numbers you input using the 0-9 buttons.
G PROG +/– (
(page advance)/
buttons (page 14)
Press to change the TV channel.
In the Teletext mode, press to access the next or preceding
page.
H
(sleep) button (page 32)
Press repeatedly to set the display to turn off automatically
after a specified period of time. If you use this function and
set the Sleep timer, the 1 (power) indicator lights up in red.
I
(display) button (page 16)
Press once to display the current channel number. The
channel number displayed will remain until you press this
button again.
J
(muting) button (page 16)
Press to turn the sound off. Press again or press the 2 +
button to restore the sound.
K M/m and OK buttons (page 17)
Use the M/m buttons to select menu items and make
adjustments.
Press the OK button to activate the selected menu item and
adjustments made using the M/m buttons.
L
(jump) button (page 16)
Press to switch the TV channel between the current one and
the last one that was selected using the 0-9 buttons.
M 2 +/– buttons (page 30)
Press to adjust the sound volume.
(page reverse))