Using Other Features - Sony MFM-HT75W Mode D'emploi

5 Press the OK button.
The "Confirm" menu appears on the screen.
6 Press the M/m buttons to select "OK" and press the
OK button.
The adjustment you have made for this channel is stored.
7 Repeat steps 1 to 6, if you want to preset another
channel.
8 Press the MENU button to exit the menu screen.
To restore the channel that have set to skip
Select "No" instead of "Yes" in step 4 above.
16

Using other features

You can also use the following TV features.
Button operations (remote control)
Press To
Turn off the sound. Press it again or press 2+ to
restore sound (page 30).
Display the current channel number. Press it
again to turn the display off.
Jump back and forth between two channels. The
display alternates between the current channel
and the last channel.
Turn off the display automatically after a
specified period of time (page 32).
Turn on or off the Teletext mode. Each time you
press this button, the Teletext mode alternates
between on and off (page 33).
Switch the "PIP" setting. Each time you press
this button, the setting changes as follows.
PIP On t PIP Off t PIP On...(page 26).
Switch the "Zoom" setting. Each time you press
this button, the setting changes as follows.
MFM-HT75W: Normal t Full t Wide Zoom
t Zoom t Normal...
MFM-HT95: Normal t Full t 16:9 t
Normal...
(page 24)
Tip
The button is also available on the display.
Button operations (display)
Press To
Switch the Picture Mode (page 31).