Cleaning And Care - Atag OX6411F Mode D'emploi

CLEANING AND CARE

Aqua Cleaning
If your oven is dirty and must be cleaned, you could use the built-
in aqua cleaning. Aqua cleaning will be available after the oven has
cooled down.
1
Remove all accessoiries from the oven.
2
Pour 400 ml (3/4 pint) of water onto the bottom of the
oven.
3
Close oven door.
4
Set the operation knob to aqua cleaning. When the
display starts to blink and a beep occurs, the operation is
complete.
5
Set the operation knob to Off to end the aqua cleaning.
6
Clean the oven interior with a soft clean cloth.
EN 39