Cleaning The Oven Cavity; The Cleaning Function; When To Clean By Pyrolysis - Atag ZX6011Q Mode D'emploi

Table des Matières

Les langues disponibles

This oven is equipped with a pyrolysis cleaning

function:

- Pyrolysis is a cleaning method during which the

oven is heated to a high temperature to remove

debris and splatter caused by spitting and dripping

food. The smoke and smells that this produces are

removed as the air passes through a catalyst.

- It is not necessary to run the pyrolysis feature after

every use of the oven, simply when the oven is dirty.

As a safety measure, once the temperature is higher

than normal use the door automatically locks. You cannot unlock it even by tur-

ning the pyrolysis feature off.

On your oven, the screen displays the symbol

Your oven is equipped with a system that indicates when it needs cleaning,

and which can be checked in the "Cleaning" option. But when the oven is dirty,

a reminder is automatically displayed on the oven screen.

If your oven smokes when the pre-heat feature is on or if there is a lot of

smoke during a cooking cycle run the pyrolysis cycle.

You can also use this feature if there is an unpleasant smell of cooking when

the oven is cold.

FOOD WITH LITTLE Biscuits, vegetables, cakes

SPATTERING

FOOD THAT

Meat, fish (in an open dish)

SPATTERS

FOOD THAT

SPITS BADLY

Do not wait until the oven is coated in dirt before cleaning it.