Troubleshooting - Atag ZX6011Q Mode D'emploi

troubleshooting

what if.....
IF YOU REALIZE THA T
The oven isn't heating.
The lock symbol is flashing on
and off.
The light inside the oven isn't
working.
Cleaning by pyrolysis has not
occurred.
Your oven makes a beeping
noise
Your oven is displaying a
134
POSSIBLE CAUSES
• The oven isn't connected to the power
supply.
• The fuse has blown.
• The temperature selected is too low.
• The door lock is faulty.
• The lamp is unusable.
• The oven isn't connected to the power
supply or the fuse has blown..
• The door is not shut properly.
• The door-locking system is faulty.
• The temperature sensor is faulty.
• The plate that detects when the door
is shut is faulty.
• During cooking.
+ -
• When cooking is complete.
RØglages
• When you press the buttons.
• The cooker controls are locked (child
.
safety).
WHA T SHOULD YOU DO?
- Connect to power supply.
- Change the fuse, checking that it is 16A.
- Increase the temperature selected.
-- Contact the After-Sales Service.
- Change the bulb.
- Connect to power supply or change
fuse.
- Check the door is properly closed
- Contact the After-Sales Service.
- Contact the After-Sales Service.
- Contact the After-Sales Service.
- The temperature of your choice has
been reached.
- Your programmed cooking cycle is com-
plete.
- Normal operation.
- To stop this, press on the button and
choose "Unlock".