Locking The Oven Controls; Child Safety - Atag ZX6011Q Mode D'emploi

carrying out the pyrolysis cleaning of your oven.
c) the end of the pyrolysis cleaning
cycle
Your oven tells you when the pyrolysis cleaning
cycle is over.
As soon as the door unlocks, your oven indicates
that the cleaning cycle is complete.
Simply remove the burnt residue from the oven cavity using a damp sponge.
It is possible to prevent access to the oven controls by proceeding as follows:
With the oven turned off, press on the
"key" lights up at the bottom of the
screen -> access to the oven
controls is now blocked.
To unlock this, press on any button,
select the "Unlock" box and confirm
your choice by pressing the button.
The controls on your oven are now accessible once again.
You cannot lock the oven if you have already programmed a
cooking cycle.
cleaning the oven cavity
Cooling in progress... Cooling in progress...
+ -

locking the oven controls

RØglages
button for several seconds. A
Thursday Thursday
19 19
September September
Cleaning Cleaning
finished ! finished !

child safety

133