Using The Timer Function; Locking The Contols (Child Safety) Oven Off; The "Standby Mode" Function - Atag ZX4570G Mode D'emploi

USING YOUR APPLIANCE

Using the timer function

Locking the contols (child safety) oven off

The "standby mode" function

Your oven's programmer can be used as an independent timer that
allows you to count down time without using the oven.
In this case, the 'timer' display takes priority over the clock display.
• Press the time button three times.
The 'timer' symbol and "0m00" flash.
• Set the time using the knob.
• Press the knob to confirm.
The display stops flashing after a few seconds and the 'timer' starts to
run, counting down the time in seconds.
Once the time is up, the 'timer' emits a series of beeps to let you know.
The beeps can be stopped by pressing any touch button.
Note
It is possible to change or cancel the timer programme at any time by
pressing the time button then setting the time to 0:00 and confirming.
You have the option of preventing access to the oven controls by taking
the following steps:
• when the oven is off, press the 'STOP' and 'TIME' buttons
simultaneously for a few seconds.
A "padlock" will then be displayed in the screen
• Access to the oven controls is blocked.
To unlock them, simultaneously press the 'STOP' and 'TIME' buttons
for a few seconds. The oven controls are once again accessible.
Your oven is equipped with a standby function
The display shows the time of day.
After 4 minutes with no action by the user, the oven display switches
over to standby mode.
EN 11