Using Your Appliance; Using The Programmer - Atag ZX4570G Mode D'emploi

USING YOUR APPLIANCE

Using the programmer

-
+
-
+
2
3
EN 8
How to set the time
When power is switched on the display flashes 12h00.
• Set the time using the knob.
Example: 12h30.
• Press the knob to confirm.
The display stops flashing.
To alter the time
• Press the timer button for a few seconds until the display flashes
and then release it.
A beep indicates that the time may now be set.
• Adjust the time, using the knob.
• Press the knob to confirm.
Warning
If the setting is not confirmed, the adjustment will automatically be
saved in the appliance's after a few seconds.
Immediate cooking
The programmer should only display the time. It should not be flashing.
• Use the knob to select the required cooking setting.
Example: COMBINED HEAT Recommended temperature 180 °C.
• Confirm by pressing the knob once.