What Should I Do If; Environmental Aspects; Disposal Of Packaging And Appliance - Atag OX611M Mode D'emploi

faults

what should I do if...

If the appliance does not work properly, this does not always mean that it is defective.
Try to deal with the problem yourself first. Phone the service department if the advice
given below does not help.
fault cause
Oven or grill does not get hot. Timer not set.
Fuse in meter cupboard
defective.
Temperature not correct. Temperature incorrectly set.
Thermostat defective.
Oven lighting not on.
No power supply.
Light bulb defective.
GB 18
solution
,
Turn the timer to
or set a time.
Replace the fuse.
Set the oven temperature
again.
Switch oven off and phone
the service department.
The light comes on when the
door is opened and as soon
as you select a function.
Insert the plug in the socket.
Switch oven off and replace
the bulb. Disconnect the
appliance from the power
supply off by removing the
plug from the socket or by
turning the main switch in the
meter cupboard. You can
unscrew the glass cover from
the rear wall of the oven. The
bulb is then accessible.
Replace it with a new bulb
230 V-50 Hz-300 °C.

environmental aspects

disposal of packaging and appliance

The appliance's packaging is recyclable. The following may be
used:
• cardboard;
• polyethylene film (PE);
• CFC-free polystyrene (PS rigid foam).
Dispose of these materials responsibly and in accordance
with government regulations.
The government can also provide information about the
responsible disposal of discarded domestic appliances.
GB 19