Connection Lugs - Wacker Neuson G 100 Notice D'emploi

G 100 / G 120
4.9

Connection Lugs

Location and The customer connection lugs are located on the lower right side of the control box
description
behind a hinged terminal door. The lugs provide connection points for attachment
of outside loads.
Connecting to
Make connections to the lugs by running the power cables up through the slots
the lugs
in the bottom of the panel and into the lug.
Use a 5/16-inch or 8 mm Allen wrench to tighten the cable connections in place.
WARNING
Electrocution hazard! High voltage is present inside the hinged terminal door when
the generator is operating.
Do not open the hinged terminal door unless the engine is stopped.
wc_tx001687gb.fm
41
Operation
wc_gr005694