Warning Light - Wacker Neuson G 100 Notice D'emploi

G 100 / G 120
4.4

Warning Light

Location and The amber warning light (d) is located on the metering panel. The light serves as a
description
pre-alarm and turns on prior to a potential engine fault condition. At the same time
that the light goes on, the LCD panel will begin blinking to indicate which engine
function is approaching its fault value.
R
Engine pre- Fuel Level = 15%
alarms
High Temperature = 226°F
Low Oil Pressure = 20 psi
Time to Service = 250 hours
Diagnostic Active Engine Diagnostic Table Codes (DTCs) can be viewed in the menu. See
Table Codes
topic Navigating the Menus.
wc_tx001687gb.fm
d
V Ø A HZ
DIAGNOSTICS
DIAGNOSEN
DIAGNOSTICOS
DIAGNOSTICS
wc_gr005201
OFF OFF
AUS AUS
APAGADO APAGADO
ARRET ARRET
REMOTE START REMOTE START START / RUN START / RUN
FERNSTART FERNSTART START / LAUFEN START / LAUFEN
ARRANQUE REMOTO ARRANQUE REMOTO ARRANQUE / MARCHA ARRANQUE / MARCHA
DEMARRER / MARCHE DEMARRER / MARCHE
DEMARRAGE A DEMARRAGE A
DISTANCE DISTANCE
37
Operation