Installation And Operation; Installation - Bartscher WB2110 Mode D'emploi

5. Installation and operation

5.1 Installation

CAUTION!
Any installation, connection and maintenance work related to the device must
be performed by the qualified and certified technician in accordance with the
applicable international, national and local regulations.
Positioning
•
Unpack the device and discard the entire packaging material according to the
regulations valid in the country of installation.
•
Place the device on top of an even, stable, dry, and water-resistant surface which is
not heat sensitive. Protect the device from unintended movement by locking the
castors with brakes.
•
Never place the device on an inflammable surface.
•
Never place the device in wet or damp locations.
•
Place the device so that it is easily accessible, leaving enough space to freely service
the device and ensure appropriate air circulation.
•
Never place the device directly against walls, low walls, furniture or other objects
which are made of flammable material. Keep a distance of at least 10 cm at the
sides and at the rear from walls and other objects. Take into account the applicable
fire protection regulations.
•
If keeping the above mentioned distance is impossible, apply appropriate safety
measures (e.g. heat-resistant foil), which will ensure keeping the wall's temperature
within the safe range.
•
Before the first use, remove the protective foil from the device. Remove the foil slowly
not to leave glue residues. Remove possible glue residues with appropriate solvent.
CAUTION!
Never remove the type plate and warning signs from the device.
•
Place the device so that the plug is easily accessible so as to quickly disconneet the
device if the need arises.
•
When the device is in appropriate location lock the castors with brakes.
- 34 -