Installation And Operation; Installation - Bartscher 1400T1S2 Mode D'emploi

5. Installation and operation

5.1 Installation

CAUTION!
All installation, assembly and maintenance work must be performed by
specialists with relevant professional qualifications (approved by the
manufacturer or seller) while observing the applicable law in the country in
which the installation is performed as well as the regulations regarding the
safety of the product and workplace.
Unpacking and positioning
•
Remove external package (wooden crate and/or carton box) and dispose of them
accoring to the valid regulations of a country where the device is installed.
•
Remove all accessories, information materials, and plastic bags from the device.
•
Check completeness of delivery.
•
The refrigerated counter is designed for installation under the work surface.
•
Place the device on a firm, dry, level and waterproof surface adapted to the impact
of high temperatures and sufficient load-bearing capacity for the weight of the
device including the entire contents.
•
Never place the device on flammable surfaces.
•
Do not place the device in the vicinity of an open flame, electric ovens, heating
stoves or other heat sources, such as direct sunlight. High temperatures may
adversely affect cooling performance and power consumption.
•
Place the device in such a way as to ensure proper circulation of air. Never cover
or block ventilation holes of the device.
•
Do not place the device in places of high air humidity. The excessive humidity may
damage the device. The device reaches its optimal operational conditions in
environment temperature from 10° C to 30° C and relat ive air humidity from 30 to 55%
in the installation place.
•
Do not use doors, door handles and other protruding parts of the device as the
support during transportation. Move the device only by lifting it with appropriate
transport device (e.g. forklift), to avoid damaging feet or other components.
•
After arranging the device at the desired place, tighten/loosen the adjustable feets
until the device is standing straight.
- 31 -