Bartscher 1400T1S2 Mode D'emploi page 29

•
In any case do not open the device housing. In case of
electrical or mechanical modifications the electric shock
hazard will occur.
•
Never immerse the power cord or plug in water or other liquids.
•
Do not use any acid agents and make sure no water ingresses
the device.
•
Never operate the device with moist hands or standing on wet
floor.
•
Disconnect the device from the electric power supply:
when the device is not used,
-
in case of anomalies during operation,
-
before cleaning.
-
HOT SURFACE! Burn hazard!
To avoid the hazard results please follow the safety instructions
below.
•
During normal use, the condenser and compressor surfaces
may be hot. To avoid burning your palm or hands, do not
touch them with your bare hands. Wear protective gloves!
WARNING! Fire or explosion hazard!
To avoid the hazard results please follow the safety instructions
below.
•
Do not store the flammable or explosive substances in the
device, like ether, kerosene, or glues.
•
Do not clean the device with use of flammable liquids.
The released vapours may cause fire or explosion.
- 25 -