Ingersoll Rand X8I Mode D'emploi page 24

Information Displays
To view detailed information applicable to the
selected User menu display item press Enter.
To view detailed information applicable to the
selected User menu display item press Enter.
Real Time Clock:
2
1
Shows the next Pressure Schedule event.
1: The Current Active Table
2: Day (#1=Monday, #7=Sunday)
3: Time (24hr system)
4: Table
Items 2 and 3 show the day and time that the unit
will change to use the 'Table' shown in item 4.
Compressor Status:
3
1
1
1
2
1: Compressor Number
2: Priority Setting
3: Zone Allocation Setting
4: Compressor/Connection Type
5: Maximum Capacity % Setting
6: Minimum Capacity % Setting
7: Minimum Efficiency % Setting
Item values 6 and 7 are only shown if compressor
type is IRV-485 (variable capacity/speed).
1 1 3
3
T2 4
-485
4
1
2
3
Primary Detected Pressure:
1
1: Active Table
2: Upper (Unload) Pressure Set Point
3: Lower (Load) Pressure Set Point
4: Minimum Pressure Alarm (Warning)
Sequence Rotation:
1
Day of the week (#4: Thursday), the time of day
(18:00) and the date (18/05/2006) of the next automated
sequence rotation event.
The active 'mode' of operation
"ABCD" The current active rotation sequence assignment.
Manual Sequence Rotation:
The sequence assignment can be manually rotated at any
time. When viewing the 'Sequence Rotation' information
screen press Enter:
The manual rotation symbols will appear and
flash. Press Enter again to execute a manual rotation or
Escape to abandon the manual rotation.
Automated sequence rotation is not disrupted by
a manual rotation; the next scheduled automated
sequence rotation event will still occur.
Compressor Identification
Each compressor connected to the X8I will have a unique
assigned compressor identification number; starting at
compressor 1 increasing sequentially to the number of
compressors connected to the X8I.
24
1 2
2
3
4
4 1