Customer Service; Technical Data - uebe VISOMAT Mode D'emploi

D
2.

Customer service

The unit may only be repaired by the manufacturer or by an expressly authorised
organisation.
Please contact:
UEBE Medical GmbH
Zum Ottersberg 9
97877 Wertheim, Germany
Tel.: +49 (0) 9342/924040
Fax: +49 (0) 9342/924080
E-mail: info@uebe.com
Internet: www.uebe.com
3.

Technical data

Unit type: Digital automatic unit with electric pump for
measuring blood pressure on upper arm
Dimensions: L = 115 mm x W = 150 mm x H = 54 mm
Weight: 330 g not including batteries
Display: LCD display (liquid crystal display) for measured
values and check displays
Memory: 2 memories each with 60 measured values (stored
automatically) and average value (A)
Measurement procedure: Combines auscultatoric and oscillometric determi-
nation of systole, diastole and pulse
Reference procedure of Auscultatoric measurement
clinical testing:
Inflating pressure: approx. 30-40 mmHg above systolic blood
pressure
EN-50
Technical information Technical information
Pressure display range: 0-300 mmHg
Measurement range Systolic: 50-250 mmHg
Diastolic: 40-150 mmHg
Pulse: 40-160 pulses/min
Error limits: Blood pressure measurement: corresponds to EN
1060 Part 3
Pressure measurement: ± 3 mmHg
Pulse measurement: ± 5%
Serial number: The unit bears a serial number SN which pro-
vides clear identification.
Power supply: Battery type: 4 x 1.5 V AA alkali manganese (LR
6) or lithium (FR 6) round cells, service life: more
than 800 measurements in 2 years
Optionally stabilised type A1 mains adapter,
output 6 VDC, minimum 600 mA
Cuff with microphone: Metal ring cuff for arm circumferences of 23-43
cm, type UWK
Operating conditions: Ambient temperature 10 to 40 °C
Relative humidity up to 85%, non-condensing
Storage and transport Ambient temperature -5 to +50 °C,
conditions: Relative humidity up to 85%, non-condensing
Air deflation valve: Electronically controlled
Automatic switch-off approx. 3 minutes after end of measurement
Radio clock signal: DCF77
D
EN-51