Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Sigfox Smart Building COMFORT - Guide utilisateur / User guide version V1.0.1
5. Installation and Start-up
5.1. Opening and closing the unit
5.2. Configuring the device
Insert a flat screwdriver into the opening on the top
of the casing and press. The casing opens in two and
the front panel comes off.
CAUTION: Press gently and straight so as not to
damage the casing
Front face
To configure the device:
1.
Open the unit (paragraph 5.1)
2.
Insert the micro-USB
3.
Configure your device as described in paragraph 3.
DISTRIBUTED BY TEXIM EUROPE
To close the unit, insert the bottom of
the front panel first and clip the top of
the casing.
2
1
FR
EN
Page
77
of 85
Publicité
Table des Matières
