Sigfox Smart Building COMFORT - Guide utilisateur / User guide version V1.0.1
1. PRESENTATION OF THE PRODUCT
Description :
• Le Sigfox Smart Building COMFORT from adeunis® is a ready-to-use radio transmitter for measuring ambient temperature and humidity.
• This device meets the needs of users to monitor the temperature and humidity of their buildings via an LPWAN network.
• The device issues data periodically or when thresholds are high or low.
• The user can access the transmitter configuration locally via a micro-USB port or remotely via the Sigfox network, letting you configure, in
FR
particular, periodicity, sending modes and alarm thresholds.
• The Sigfox Smart Building COMFORT is powered by a changeable internal battery.
• It also has a button that send frames when pressed.
• The device is compatible with the adeunis® KARE Device Management platform
IMPORTANT NOTE: the Sigfox Smart Building COMFORT is started with a button on the side of the box (see paragraph 5.7)
EN
Package contents
The device is delivered in a carton package containing the following: Front panel, rear panel and electronic card, ER18505 battery
2 x CBLZ 3.5x 19mm screws, 2 x SX5 Fischer plugs
1.1. General description
Opening the case
LEDs
Start button and connected but-
2 fixing screw locations
ton (function Digital Input 1)
Physical socket location for terminal block (Digital Input 2)
Page
49
of 85
DISTRIBUTED BY TEXIM EUROPE