ADEUNIS Sigfox Smart Building COMFORT Guide Utilisateur page 66

Sigfox Smart Building COMFORT - Guide utilisateur / User guide version V1.0.1
Note concerning the register S301
Caution: in order to give more freedom to the user the device has not been limited to a maximum number of backups per frame depending
on the network used. We therefore strongly recommend not exceeding the maximum number of readings authorized by the network if you
do not want to lose data (the oldest readings will be overwritten in favor of the most recent ones). If this occurs, an indication is given in the
data-frame byte status (explained in section 4.1.8).
3.3.1.02 Registers that configure the temperature alarm
FR
Register Size
(bytes)
S330 1
EN
S331 2
S332 1
S333 2
S334 1
3.3.1.03 Registers that configure the humidity alarm
Register Size
(bytes)
S340 1
S341 1
S342 1
S343 1
S344 1
Description
Type of alarm chosen for the
temperature
High threshold of the T°
alarm
High hysteresis
Low threshold of the T°
alarm
Low hysteresis
Description
Type of alarm chosen for the humidity Decimal
High threshold of the humidity alarm
High hysteresis
Low threshold of the humidity alarm
Low hysteresis
DISTRIBUTED BY TEXIM EUROPE
Encoding Details
Decimal Default: 0
0: off 1: low threshold
2: high threshold
3: low and high thresholds
Decimal Default: 0
Min/max: -200 to 600
Unit: T° in tenths of °C
-200 equals -20°C and 600 equals + 60°C
Decimal Default: 0
Min/max: 0 to 255
Unit: T° in tenths of °C
0 equals 0°C and 255 equals + 25.5°C
Decimal Default: 0
Min/max: -200 to 600
Unit: T° in tenths of °C
-200 equals -20°C and 600 equals + 60°C
Decimal Default: 0
Min/max: 0 to 255
Unit: T° in tenth of °C
0 equals 0°C and 255 equals + 25.5°C
Encoding Details
Default: 0
0: off
1: low threshold
2: hight threshold
3: low and hight threshold
Decimal Default: 0
Min/max: 0 to 100
Unit: %
Decimal Default: 0
Min/max: 0 to 100
Decimal Default: 0
Min/max: 0 to 100
Decimal Default: 0
Min/max: 0 to 100
Page 66 of 85