Scheppach Bestcombi 3.0 Notice Originale page 53

Table des Matières

Publicité

6.
INBETRIEBNAHME DER MASCHINE
h. Elektrischer Anschluss
Das
installierte
elektrische
Erdung angeschlossen und mit 20 A gesichert werden
(Wechselstrommotor). Bei einem Drehstrommotor beträgt die
Absicherung 16 A.
Die Maschine ist für eine Wechsel- oder Drehstromversorgung
mit den folgenden Eigenschaften ausgelegt :
Strohmart
Dauerspannung
Frequenz
Nennstrom
Gesamtleistung
Wechselstrohmanschluss 230V (35)
Das Anschlusskabel (nicht mitgeliefert) muss 3 Adern der Type
H07RN-F / 1,5 mm², einen CEE-Stecker für den Netzanschluss
und eine CEE-Steckdose für den Maschinenanschluss
haben.
2 Adern dienen der Stromzufuhr L1 und N, das dritte (grün/
gelb) ist für die Erdung bestimmt.
Drehstrohmanschluss 380V (36)
Das Anschlusskabel (nicht mitgeliefert) muss 5 Adern
der Type H07RN-F / 1,5 mm², einen CEE-Stecker für
den Netzanschluss und eine CEE-Steckdose für den
Maschinenanschluss haben.
Die 4. Ader (grün/gelb) muss an die Erdungsklemme
angeschlossen werden.
D
System
muss
an
AC
230 V
380 V
50 Hz
50 Hz
16 A
750 / 1500 W
750 / 800 W
6.
PUTTING THE MACHINE INTO OPERATION
h. Electric connection
The electric system installed must be earthed and protected
eine
by a 20 Amp fuse (single-phase motor). A three-phase motor
must be protected by a 16 Amp fuse.
The machine has been designed for a single-phase or three-
phase power supply with the following characteristics :
AC
Type of current
Continuous voltage
Frequency
Nominal current
20 A
Total power²
230V Single-phase connection (35)
The connection cable (not supplied) must have 3 leads of type
H07RN-F / 1.5 mm², a CEE plug for connection to the power
supply, and a CEE socket for the machine connection.
2 leads serve for the power supply L1 and N, the third lead
(green/yellow) serves for the earthing.
380V Three-phase connection 380V (36)
The connection cable (not supplied) must have 5 leads
of type H07RN-F / 1.5 mm², a CEE plug for connection
to the power supply, and a CEE socket for the machine
connection.
The 4th lead must be connection to a earth terminal.
GB
AC
230 V
380 V
50 Hz
50 Hz
16 A
750 / 1500 W
750 / 800 W
AC
20 A
53

Publicité

Table des Matières
loading

Table des Matières