Transport; Storage - AL-KO solo CS 4235 Mode D'emploi

GB
Saw chain File diameter
(guide rail)
90PX040X
(104MLEA041)
91P045X
(120SDEA041)
91PX052X
(140SDEA041)

9 TRANSPORT

WARNING!
Danger of fatal injury and danger of
extremely severe injury.
During transport, a running saw chain
can lead to extremely serious and even
fatal injury.
■
Never carry and transport the chain
saw with the saw chain running.
■
Before transporting, carry out the
measures mentioned above.
Before transporting, carry out the following mea-
sures:
1. Switch off the chain saw and remove the re-
chargeable battery.
2. Fit the chain guard.
3. Carry the chain saw only at the bow handle.
Guide rail and saw chain should be facing to
the rear.
52
Top plate an-
gle
Rotational an-
gle of the tool
4.5 mm 30°
5/32" 30°
5/32" 30°
Depth gauge setting
Down angle Head tilt angle
(55°)
Inclination an- Side plate angle
gle of the tool
0°
0°
0°
4. In vehicles: Secure the chain saw against tip-
ping over, damage and leakage of chain oil.

10 STORAGE

Thoroughly clean the chain saw after each use.
Store it in a dry, lockable place out of the reach of
children.
Carry out the following jobs before intervals in
work lasting for longer than 30 days:
■
Switch off the chain saw and remove the re-
chargeable battery.
■
Empty the oil tank for the saw chain oil.
■
Remove the saw chain and guide rail, clean it
and spray it with rust-proofing oil.
■
Thoroughly clean the chain saw and store it
in a dry place.
Transport
Depth gauge
setting
75° 0.025"
85° 0.025"
85° 0.025"
File
CS 4235