Technical Data - AL-KO solo CS 4235 Mode D'emploi

GB

13 TECHNICAL DATA

Chain saw
Item no.
Idling speed
Operating speed
Chain sprocket pitch
Chain brake
Chain run-on time (DIN EN 60745-2-13 – 19.107)
Chain run-on time (DIN EN 50144-2-13:2001 – 18.104)
Activation of the chain
Chain oil tank volume
Weight with guide rail and saw chain
Weight without guide rail and saw chain
Overload protection
Sound power level LwA (DIN EN ISO 3744)
Sound pressure level LpA
Vibration value (DIN EN 28662-1)*
Saw chain
Drive link thickness
Chain bar
Length of the guide rail
Cutting length
* Notes:
■
The vibration emission value given has been measured according to a standardised test method
and can be used to compare one power tool with another.
■
The vibration emission value can also be used for an initial assessment of the exposure (vibration
exposure degree).
■
The vibration emission value may differ from the given value during actual use of the power tool,
depending on how the power tool is used.
■
Try to keep the vibration load as low as possible. Exemplary measures to reduce vibration are the
wearing of gloves when using the tool and the limitation of working time. All parts of the operating
cycle must be taken into account (e.g. times when the power tool is switched off and those in which
it is switched on but runs without load).
54
90PX040X 91PX045X
1.1 mm 1.27 mm
104MLEA041 120SDEA041
10" / 25 cm 12" / 30 cm
17 cm 22 cm
Technical data
CS 4235
113616
15 – 20 m/s
7 – 20 m/s
3/8"
Yes (electrical, PCB and
brake rod)
Max. 0.15 s
Max. 2 s
Twofold
250 ml
3.80 kg
3.15 kg
No
108 dB(A)
88 dB(A)
K = 3.0 dB(A)
2.5 m/s
2
K = 1.5 m/s
2
91PX052X
1.27 mm
140SDEA041
14" / 35 cm
27 cm
CS 4235