Materials In Direct Or Indirect Contact With The Patient - AirSep Focus Manuel

Focus™
BT017-1,2,3
or 4
BT017-1
BT017-2
BT017-3
BT017-4
CD035-1

Materials in direct or indirect contact with the patient

o
Concentrator casing ............................... Valtra/ABS/Polystyrene
o
Concentrator Control Panel ..................... Nitrile Rubber
o
Gas Outlet .............................................. Delrin
o
ON/OFF Power Switch ............................ Thermoplastic
o
Unit Label ............................................... Lexan
o
Coil cords ............................................... Polyurethane
o
Cord connectors ..................................... Polycarbonate/Vinyl chloride
o
Cord switch ............................................. Nylon
o
Power Supply .......................................... Lexan 940(Polycarbonate)
o
Battery Pack ............................................ Lexan 945
o
Battery Pack, Power Supply Labels ........ Polyester film
o
Concentrator carrying case ..................... 100% Polyester microfiber w/
o
Power Supply, Battery carrying case,
Belt and Strap ......................................... 100% Polyester microfiber w/
®
AirSep Corporation
MN172-1 rev. A - 02/13
Optional AirBelt includes the following:
AirBelt with Power Supply including the following power cords
as applicable:
AirBelt with Power Supply (BT017 extended cord length
4 ft. / 1.2m) w/ CD023-2 Power Cord 120VAC (8 ft. / 2.4m)
AirBelt with Power Supply (BT017 extended cord length
4 ft. / 1.2m) w/ CD017-2 Euro Power Cord (8 ft-2 in / 2.5m)
AirBelt with Power Supply (BT017 extended cord length
4 ft. / 1.2m) w/ CD025-1 Australian Power Cord 250 VAC
(6 ft-6 in / 2.6m)
AirBelt with Power Supply (BT017 extended cord length
4 ft. / 1.2m) w/ CD017-4 UK Power Cord (8 ft-2 in / 2.5m)
Cord for connecting AirBelt to Focus
AirBelt-to-Focus cord with On/Off switch (8in / 203.2mm)
PCV backing
PVC backing
EN
EN-33