Important Safety Rules For Optional Airbelt - AirSep Focus Manuel

EN

Important Safety Rules for Optional AirBelt

The incorrect use of AirBelt can cause the battery to get hot,
ignite, and can cause serious injury. Be sure not to pierce, strike,
step on, or drop the battery, or otherwise subject the battery to
strong impacts or shocks.
Replace safety cap on AirBelt cord when not in use.
Do not attempt to charge the optional AirBelt with the Focus power
supply or AirBelt can be damaged.
Use only the AirBelt power supply provided to charge AirBelt.
Depending upon the temperature of the AirBelt battery, it can take
several minutes for the charging cycle to start after connecting to
power. This is a normal condition and is intended for safe charging,
AirBelt does not need to be fully discharged before recharging. It is
recommended to charge AirBelt after each use.
If the AirBelt power supply remains connected when AirBelt is fully
charged, the four LEDs will turn off within 15 minutes.
EN-10
Focus™
®
AirSep Corporation
MN172-1 rev. A - 02/13