Maintenance; Blades - Worx LANDROID WR165 Manuel Utilisateur

Maintenance

MAINTENANCE
Your Landroid works hard and needs to be cleaned and checked at regular intervals to ensure that it is operating at maximum
efficiency. This section helps you keep Landroid in good shape so it can last for years without issues. Turn off the machine and
remove the battery before carrying out any service or maintenance.

Blades

A. The blade turning disc rotates both clockwise and counter-clockwise at random to use both cutting blade edges and minimize the
frequency of replacing the blades.
B. Each cutting blade will last up to 2 months when it is programmed to mow every day.
C. Always check to see if the blades are chipped or damaged and replace them if necessary.
D. When the cutting blades are dull and worn out, they should be replaced with the spare blades provided with your Landroid. Spare
blades are also available.
WARNING! Before cleaning, adjusting, or replacing the blades, turn your Landroid OFF and remove the
battery. Always wear protective gloves.
1. Replacing the Blades
Remove the battery (fig. 1) and turn the Landroid over (fig.2).
Take the screws off the blades with a screwdriver (fig. 3 - 4).
Firmly screw on the new blades (fig. 5 - 6).
1
3
5
28
2
4
6
EN