Worx LANDROID WR165 Manuel Utilisateur page 25

Getting started
General settings
Navigation
Page *
Working time
Security
* Be continuously updated according to the software version.
** For after-sales service only
2. Set date & time
Rotate the clockwise to select "DAY" and press the
will be blinking; continue to rotate the
and press the to confirm. Use the same method to complete for month/year/
hour/minute.
3. Set a Schedule
Following the same instructions as date & time, use the
the week and set the time to schedule Landroid. Border cut can also be enabled/
disabled for each day. Anticlockwise rotate
quicker way to schedule, it is recommended to download the Landroid app.
4. Customize work time
This feature enables a quick adjustment of daily work time without the need to
change work times for each individual day. Anticlockwise rotate
setting. For example, if you wanted to increase total work schedule to compensate
for a higher growth rate during the peak of mowing season, simply rotate the
to an appropriate positive percentage increase. Conversely, if you wanted
to decrease total work time to compensate for the latter half of the mowing
season when growth rates slow, simply rotate the
percentage decrease. This setting can also be adjusted via the app.
This adjustment follows a simple calculation:
DWT x [1+ (WT%/100)] = TWT
DWT = Daily work time
WT% = Work time percentage adjustment
TWT = Total work time
Example:
You want to decrease the current schedule of 5 hours per day, M-F, by 30%.
Rotate the until the screen reads "-30%". This would subtract 30% of the
current work time to yield:
(300 min) x [1 - (30/100)] = 210 minutes (3.5 hours) per day.
Language
Time format
Date format
Set date & time
Rain start delay
App link
Diagnose**
Auto Work Time
Customize work time
Define zones
Customize work zone
Change PIN code
. The selected number
clockwise to select the desired number
to select the day of
to activate the setting. For a
to activate the
to an appropriate negative
Set date & time
Date(dd/mm/yy): 2020/07/07
Time(12h): 08:37 PM
Only for reference
Customize work time Monday 6h30min
Sunday 0h20min
Scheduler #1 09:00-14:30
Monday 0h20min
Border cut
Tuesday 4h0min
Scheduler #2
Total: 15h10min
1 1
2 2
Only for reference
Monday 6h30min Monday 6h30min
Scheduler #1 09:00-14:30
Scheduler #1 09:00-14:30
Border cut
Border cut
Scheduler #2 14:30-14:30
Scheduler #2
Border cut
1
2
Wed.11/29 09:00PM Working time adjust
0
Total: 24h45min
Only for reference
EN
Set date & time
Date(dd/mm/yy): 2020/07/07
Time(12h): 08:37 PM
Monday 6h30min
Scheduler #1 09:00-14:30
Border cut
Scheduler #2
1
2
Only for reference
Working time adjust
- 10%
Total: 22h16min
25