Worx LANDROID WR165 Manuel Utilisateur page 16

Getting started
No more grass clippings to collect
Landroid's daily mowing produces very short clippings that don't need to be de-thatched. These clippings are a perfect organic nu-
trient for your lawn. Frequent mowing boosts the density of grass blades and effectively prevents the propagation of weeds.
Cut to edge
The special offset blade gets as close as possible to the border of your lawn, leaving you little trimming to do.
Cutting Height
Before starting your Landroid for the first time, make sure your grass is no longer than 4 in. If longer, use a regular mower to cut it
before operating Landroid. If you want to drastically shorten the height of your grass, it is recommended that you do so progressively,
by adjusting the cutting height in steps.
Security & PIN Protection
To prevent unauthorized usage, Landroid is protected by a PIN code that you can easily set up. Set up your PIN before first use. Be
sure to record your PIN in a safe place. Default PIN is 0000 or AAAA (depending on the model).
Hose cleaning
You can hose Landroid off to get rid of dirt, grass and grime that it picks up while mowing. Keep Landroid looking and performing its
best.
GroundTracer
With the new auto-lifting design, its blades can raise automatically due to its floating disc, which gives it more clearance. This helps
Landroid avoid certain situations that would block other robotic mowers.
16
EN