Getting Started - Worx LANDROID WR165 Manuel Utilisateur

Getting started

HOW LANDROID WORKS
Landroid is an autonomous machine, capable of operating on its own. It knows when it needs to go to its charging station, can sense
when it is raining, can stop itself if it senses a problem and knows to stop, draw back, and turn around when it bumps into something
blocking its path. To prevent an accident, Landroid will also automatically stop its blade disc from rotating if it is lifted off the ground.
Self-Charging
When your Landroid needs to recharge, it will stop mowing and follow the boundary wire back to its charging station. Once charging
is complete, Landroid will automatically resume mowing or stay in the charging station according to its mowing schedule.
Edge/Perimeter Mowing
Landroid is programmed to mow the grass along the perimeter of your lawn twice a week on Monday and Friday. If you want to change
this pre-set, you can modify it via the Landroid App or by using the control panel in "Work time-Customize Work time" menus. See
detailed instructions at the end of this manual. If you enable the Auto Schedule feature in the App. you cannot manually adjust the
Border Cut feature.
Rain sensor
Landroid is weather resistant and happy to be outside. But mowing wet grass does not give you the best finish or result. Landroid is
equipped with a rain sensor which detects rain and tells Landroid to stop mowing and go back to its charging station.
Rain delay time
After a rainfall, Landroid re-starts when the grass is no longer wet. The default Rain Delay time is 180 minutes. You can change the
Rain Delay time setting via the Landroid App. You can also adjust this from the control panel in "General Settings-Rain Start Delay"
menus.
In more extreme weather
In case of a lightning storm, protect Landroid by unplugging the charging station, disconnect the boundary wire, and make sure
Landroid is not able to charge. In the winter and especially in case of very cold weather and snow, we recommend you store
your Landroid inside.
EN
15