Maintenance; Keep It Sharp; Replacing The Blades - Worx LANDROID WR140 Manuel Du Propriétaire

Maintenance

MAINTENANCE
Your Landroid works hard and needs to be cleaned and checked from time to time. This section of our guide helps you keep
Landroid in good shape so it can last for years without troubles. Here's how to take care of your Landroid

KEEP IT SHARP

Landroid does not cut grass like other mowers. Its cutting blades are razor sharp on 2 edges and rotate in both directions for
maximum cutting capacity.
• The blade turning disc makes a clockwise and counterclockwise rotation at random to use both cutting edges and minimize the
frequency of replacing the blades
• Each cutting blade will last up to 2 months when it is programmed to mow every day
• Always check to see if the blades are chipped or damaged and replace them if they are
• When the cutting blades are dull and worn out, they should be replaced with the spare blades provided with your Landroid.
Spare blades are also available at your nearest Landroid retailer and on worx.com
WARNING! Before cleaning, adjusting, or replacing the blades, turn your Landroid OFF and remove the battery. Always wear
protective gloves.

Replacing the Blades

Remove the battery (fig. 1) and gently flip the Landroid over (fig.2)
1 1
Take the screws off the blades with a screwdriver (fig. 3 - 4)
3
2
4
EN
25