Change Pin; Important; Changing The Language Setting - Worx LANDROID WR140 Manuel Du Propriétaire

EN
Getting started
Start Landroid
• Place Landroid inside the boundary wire
• Press the On/Off button until the screen displays 'Welcome'
• The display prompts input of PIN
• Input the default PIN AAAA by pressing the ↑ (A) key four times
• The screen displays 'PIN code OK'
• Press the START button, then press OK. Landroid will start mowing
• You can stop Landroid at any time by pressing the STOP button
• To send Landroid to the charging station, press the Home key, then press OK

Change PIN

To make your Landroid safer and more secure, change the default AAAA PIN to a PIN of your choice.
• Turn Landroid on and unlock it by inputting the default PIN
• Press the → (D) key
• Select the padlock icon by using the → and ← Navigate buttons, then press OK
• Screen displays 'Change PIN code'. Press OK to start the procedure
• Screen displays 'Old PIN'. Input the default PIN AAAA
• Screen displays 'New PIN'. Compose your new PIN using the ABCD keys
• Your will be asked to repeat your new PIN
• If the two inputs match, the screen will confirm

Important

Write down the PIN and keep it in a safe place. For extra security, register your Landroid and record your PIN on the Worx website.
We will store it safely and you will always be able to retrieve it from the My Landroid section of the website.
Please note that in case you lose your PIN, you will not be able to operate Landroid. In order to make Landroid as secure as
possible, there is no reset procedure for the PIN that can be operated by anyone, including Landroid authorized service centers.
If you decide to sell your Landroid in the future, please restore the factory default AAAA PIN before delivering it to the new owner, or
give your personalized PIN to the new owner.
If you are delivering your Landroid to a Service Center, please let them know your PIN.

Changing the language setting

Landroid is pre-set to the language in the country where you bought it. However, if you want to change the language, please follow
the following steps.
• Turn on Landroid and insert PIN
• Press the → (D) key; screen displays the menu
• Select the gear icon with the navigation keys, confirm with OK button
• At top of General Settings list is 'Language'
• Press OK to select
• Scroll down the menu to select your language
• Press OK to confirm
20