Worx LANDROID WR140 Manuel Du Propriétaire page 30

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Quick reference
ADJUSTING THE MOWING TIME
Landroid creates its own automatic schedule and working time based on the size of your lawn and other factors. Our
recommendation is not to manually adjust these settings. However, there are 3 ways to adjust the mowing time if you want to.
1.
Use the app and follow the simple on-screen menus
2.
Adjust the working time percentage via Landroid's control panel
Depending on the growth rate of your grass, you may want Landroid to work a little harder or a little less. You can adjust the working
time in percentage increments and Landroid will recalculate its working time automatically.
Working time adjust
10
• Turn on the mower and insert PIN code
• Press the ↑(A) key or the ↓(B) key to adjust the working time in 10% increments
• Landroid will now automatically calculate a revised working time
3.
Specifically adjust each day
Landroid is factory set to automatically start at 09:00am each day, but you might want to adjust this. Here's how.
• Turn on Landroid and insert PIN code
• Press the → (D) key
• Scroll with the ←(C) and → (D) keys to the clock icon and press OK to confirm
• Now you are in 'working time' menu
• Select 'Auto Work Time' and press OK
• Select size of your lawn in m
• Press the Return key to go back to 'working time' menu
• Now select 'Customise work time' option, press OK
• Days of the week will appear with working time in hours and minutes
• Now select a day of the week, press OK
• Now a working time menu will appear for that day
• Press OK to make the time digits flash
• Select new start time in hours and minutes by pressing the ←(C) and →(D) arrows. You can change hour or minute time values
using the ↑(A) and ↓(B) keys
• Then select new stop time in hours and minutes. Then press OK to confirm
• When successful you will see the total working time for that day has been updated based on the start and stop times that
you have input
• To change the start time for other days of the week, go back to the previous customize working time menu and repeat the
steps above
Please note that because Landroid is autonomous, if you select 'Auto Work Time' you will reset any customized working times you
might have programmed erlier.
30
by scrolling with the ↑(A) and ↓(B) key and choosing the right size
2
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Landroid wr143Landroid wr150Landroid wr153

Table des Matières