Software Update; Maintenance; Keep It Sharp; Rotate And Flip The Blades - Worx Landroid L WG792E.1 Mode D'emploi

6.

Software update

®
Your Landroid L software can be updated when new versions become available. The software version will be displayed in
the diagnosis page by pressing button 2 on homepage. The latest software can be downloaded from our website
www.worxlandroid.com. See the detailed guideline on download page.
The manual in box is based on the default software in the mass production .Some new features/functions in the new
version may not exist in the manual If you found some settings not in the manual, please visit www.worxlandroid.com to
download the latest manual.
7.

Maintenance

®
Your Landroid L needs to be checked from time to time. The Landroid
well as to have its parts replaced, as they can become worn. In the following we want to let you know how to take care of your
®
Landroid L.

7.1 Keep it Sharp

WARNING: Before cleaning, adjusting, or replacing
the Blades, turn your Landroid
protective gloves.
WARNING! When fitting new blades, make sure
you replace ALL the blades. Always use new
screws when fitting blades . This is important to ensure
blade retention. Failure to use new screws could cause
serious injury.
®
The Landroid L does not cut grass like other mowers. Its Blades
(17) are razor sharp on all 4 edges and spin in both directions
for maximum cutting capacity (See Fig. J).Each blade of your
®
Landroid L has 4 cutting edges. Depending on the frequency
12
®
the Landroid L mows your lawn, the cutting blades will need
to be flipped/rotated periodically for a new cutting edge. If your
®
Landroid L is programmed to mow the lawn every day then the cutting blades will need to be rotated monthly for the
best mowing results. Each cutting blade will last up to 4 months when it is programmed to mow every day. When the
cutting blades are dull and worn out, they should be replaced with the spare blades provided with your Landroid
blades are also available at your nearest WORX retailer.
A. Rotate and Flip the Blades
®
Your Landroid L carries the Blades that are all screwed onto the Blade Disc (16). The Blades allow the Landroid
job and need care and attention. Every once in awhile, you should simultaneously rotate and flip all blades for a perfect cut.
When rotating and flipping the Blades, make sure all the Blades are adjusted at the same time or else it could make the Blade
Disc off balance. If your Landroid
rotated and flipped every month. Always check to see if the Blades are chipped or damaged and replace them if they are.
B. Replace the Blades (See Fig. K)
After some time, usually every season, your Landroid
need to be replaced. Your Landroid
using Blades of different age and quality. So when replacing the
Blades, make sure to replace all of them at the same time. You can
replace them with one of the three spare Blade kits and extra Blade
screws supplied with your Landroid
Before attempting to replace your Landroid
power off and put on protective gloves. Then follow these steps:
1. Gently flip the Landroid
2. Remove the battery cover and remove the battery.
3. Take the screws off the Blades with a screwdriver
4. Firmly screw on the new Blades
5. Refit the battery and battery cover.
IMPORTANT: After screwing the Blade to the Blade Disc,
make sure the Blade is able to spin freely.
Lawn Mowing Robot
®
L OFF and put on
®
L mows on a normal schedule (daily) then the Blades should last one season if they are
®
L 's Blades will
®
L does not like mowing while
®
L.
®
L 's Blades, turn the
®
L over
®
L works hard and after time needs a good cleaning as
1
3
J
K
2
4
®
L. Spare
®
L to do its
EN