Kiwi KMC 6940 Mode D'emploi page 36

Removing:
ATTENTION!
• Caution: Risk of injuries caused by food splashing out! Only remove the mixing
bowl lid once the cross-blade attachment has come to a standstill.
To remove the mixing bowl lid, follow the steps for attaching it in reverse order:
1. Twist the mixing bowl lid anticlockwise.
2. Lift the mixing bowl lid off the mixing bowl.
Measuring Cup

The measuring cup is used to measure out ingredients.
Moreover, the measuring cup can be used to seal shut the opening in the lid. This
prevents any loss of heat and prevents the ingredients being mixed and cooked from
splashing out.
 For this purpose, place the measuring cup with its opening facing downwards into the
opening in the lid and turn it clockwise to fix it in place.
The measuring cup can be removed during operation to allow further ingredients or
liquid to be added.
 Twist the measuring cup anticlockwise and pull it out of the opening in the lid.
When boiling cream, milk or pasta, do not insert the measuring cup into the
opening in the lid to prevent boiling over. Insert the measuring cup when
chopping up food to prevent it from splashing out.
Steaming Unit

ATTENTION!
• Caution: Risk of scalding from hot steam and hot condensation!Never use the
steaming attachment without its lid.
• Caution: Risk of scalding from hot items that are being mixed splashing out!
Before inserting the steaming attachment, ensure that the sealing ring has been fitted
correctly, is clean and undamaged so that the steaming attachment sits tightly on the
mixing bowl. If the sealing ring is damaged, replace it immediately but always do so
2. Press down the mixing bowl lid as far as it will go and
turn the mixing bowl lid clockwise until the lid handle
forms a straight line with the handle of the mixing bowl
and you hear it click in place.
36