Checchi & Magli BABY TRIUM Manuel D'utilisation Et D'entretien page 97

Replacing the driving wheels chain
E
C
D
UN41-0510MM
For this operation, proceed as outlined below.
1) Move the lever (E) to lift the wheel in order to slack-
en off the chain.
2) Loosen the knobs (A).
3) Remove the casing (B).
4) Loosen the knobs (C).
5) Remove the casing (D).
6) Move the tensioner (F) and remove the chain (G)
from the pinion.
CAUTION
The tensioner could move unexpectedly, causing in-
jury to the hands.
Proceed with the utmost caution.
English language
INFORMATION CONCERNING REPLACEMENTS
A
B
7)
8)
9)
10) Fit the casing (B).
11) Tighten the knobs (A).
12) Repeat the same procedure to replace the chain on
43
F
Fit a new chain.
Fit the casing (D).
Tighten the knobs (C).
the other driving wheel.
8
G
Use and maintenance