Checchi & Magli BABY TRIUM Manuel D'utilisation Et D'entretien page 73

Safety advice for the adjustments
Adjustment work must be carried out with the work
vehicle on flat, compact ground, with the tractor en-
gine off, parking brake engaged, and ignition key re-
Adjusting the spacing between the packing wheels and the ploughshare
The packing wheels (C) are used to ridge and compact
the soil around the planted seedlings.
The distance between the packing wheels and the
ploughshare must be adjusted according to the type of
ground.
For this operation, proceed as outlined below.
1) Lift the lever (B).
2) Turn the lever (B) to move the packing wheels (C)
closer to or away from the ploughshare (D).
3) After adjustment, return the lever (B) to the original
position.
If the part is not locked properly, tighten the lever (see
"Adjusting the packing wheel lever tightness").
Carry out the same operations to adjust the packing
wheels of the other planting units installed.
Adjusting the packing wheel lever tightness
The lever is used to lock the packing wheels in the re-
quired position.
For this operation, proceed as outlined below.
1) Lift the lever (B).
2) Turn the nut (A) to ensure optimum locking.
3) After adjustment, return the lever (B) to the original
position.
English language
ADJUSTMENT INFORMATION
moved, and adopting all the necessary safety meas-
ures required to work safely.
UN41-0703EO
UN41-0704EO
19
B
C
B
A
5
D
Use and maintenance