Checchi & Magli BABY TRIUM Manuel D'utilisation Et D'entretien page 82

Adjusting the small wheel load
The small wheel is recommended for use of the primer
mover on hard, compact soil.
For this operation, proceed as outlined below.
1) Turn the knob (A) clockwise to increase the small
wheel (B) load on the ground.
2) Turn the knob anticlockwise to decrease the load of
the small wheel on the ground.
Adjusting the small wheel scraper
For this operation, proceed as outlined below.
1) Loosen the screws (A).
2) Position the scraper (B) so that it is just touching the
small wheel.
3) Tighten the screws (A).
Adjusting the skid load
The skid is recommended for use of the prime mover on
spongy or sandy soil.
Proceed as outlined below.
Turn the knob (A) clockwise to increase the skid (B) load
on the ground.
Turn the knob (A) anticlockwise to decrease the skid (B)
load on the ground.
Decide whether the clearance of pipe (C) needs adjust-
ing with screw (D).
English language
ADJUSTMENT INFORMATION
UN41-0716EO
UN41-0717EO
UN41-0718EO
28
A
B
B
A
B
C
D
Use and maintenance
5