Setup Menu; Basic Operation; General Setup Menu; Disc Lock - Yamaha DV-SL100 Mode D'emploi

Setup Menu

Basic Operation

Press SETUP in the STOP mode to enter the Setup
1
Menu.
Press 1 2 to enter the submenu or return to the previous
2
menu.
Press 34 to highlight the desired menu.
3
Press SETUP to quit the setup menu.
4
➜ When you quit the setup menu, the settings will be
stored in the player's memory even if the player is
switched to power off.

General Setup menu

Some settings need to be made in this menu. They are:
"DISC LOCK", "PROGRAM", "OSD LANGUAGE" and
"SCREEN SAVER".
Follow the steps below:
- - GENERAL SETUP PAGE - -

DISC LOCK

PROGRAM
OSD LANGUAGE
SCREEN SAVER
Press SETUP to enter the setup menu.
1
Press 1 2 to choose the GENERAL SETUP icon
2
DISC LOCK
When the disc is locked, the player will store its specific
code into the memory for future identification. For the
next playback, the DVD player will prompt you to enter
the password. Then, press ENTER/OK to load the disc.
Press 34 to highlight "DISC LOCK".
1
Enter its submenu by pressing 2.
2
➜ Lock: Lock the disc being played.
➜ Unlock: unlock the disc.
Press 1 to return to the General Setup Page.
3
14

PROGRAM (not for JPEG / MP3 CD)

Press 34 to choose "PROGRAM".
1
Press 2 to move the cursor to the field of the submenu
2
to choose the item Input menu.
➜ Input menu: Enter the Program item.
Press ENTER/OK to enter the program page.
3
PROGRAM:TRACK(01-13)
1
2
3
4
5
Input your favorite track
Input valid track number by pressing the numeric buttons.
1
Press 341 2 to move the cursor to the next selected
2
position.
➜ If the track number is more than ten, press 2™ to
open the next page and go on programing, or press 341
2 to highlight NEXT button, and then press ENTER/OK.
Repeat this steps to input another track number until the
3
whole program is completed.
Remove a track
Press 341 2 to move the cursor to the track you want
1
to remove.
Press ENTER/OK or PLAY to remove this track from the
2
program menu.
.
Playback tracks
When programing is completed,
Press 341 2 to move the cursor to the START button.
1
Press ENTER/OK.
2
➜ DVD player will playback the selected tracks under
the programed sequence.
Quit the program playback
In the Program menu,
Press 341 2 to move the cursor to the EXIT button.
1
Press ENTER/OK to quit this menu.
2
Stop the program playback
● During playback of the programmed tracks, press STOP.
Then after you press PLAY, the DVD player will resume
normal playback.
6
_ _ 03
7
02 _ _
8
01 _ _
05 9 _ _
_ _ 10 _ _
EXIT START NEXT