Video Connections; S Video Terminal; Video Terminal; Component Video Terminal - Yamaha DV-SL100 Mode D'emploi

Preparation

Video Connections

If your AV receiver has video output jacks, connect your
receiver (and then to your TV) so that you can use one
TV for several different video sources (LD, VCR etc.) by
simply switching the input source selector of your
receiver.
The player has four types of video output jacks. Use one
of them in accordance with the input jacks of the
equipment to be connected.
(supplied)
<A> <B>
V
S
Y P
B
S VIDEO VIDEO COMPONENT
INPUT VIDEO IN
AV receiver
VIDEO COMPONENT S VIDEO
OUT VIDEO OUT OUT
VIDEO COMPONENT S VIDEO
IN VIDEO IN IN
6
<C>
C P C
B R R
<D>
S VIDEO terminal <A>
S (separate) video connection achieves a clearer picture
than composite video connection by separating color and
luminance when transmitting signals. Use commercially
available S-video cable. Receiver (and TV) with S-video
input is required.
VIDEO terminal <B>
Use audio/video cable supplied with this unit when
connecting the player to a TV.
COMPONENT VIDEO terminal <C>
Component video connection achieves high fidelity in
reproducing colors (better performance than S-video
connection), separating video signal into luminance (Y,
terminal color-coded as green), and color difference (Pb,
blue/Pr, red). Use commercially available coaxial cables.
Receiver (and TV) with component input is required.
Observe the color of each jack when connecting. If your
receiver does not have component output jacks,
connecting the player's component output directly to
your TV's component input can reproduce better video
image.
SCART Connection <D>
If your TV has only terminal for video input, and you want
to connect it directly to this unit, you can use this unit's
TV OUT jack.
Note:
– Ensure that the "TV" indication on SCART cable is
connected to the TV set and "DVD" indication on SCART
cable is connected to this unit.
Connecting an AV receiver with a
SCART terminal
If your AV receiver has SCART terminals, you can
connect this unit's TV OUT to your AV receiver's SCART
terminal.
AV receiver