Transport And Storage; Transport; Storage; Maintenance Work - Tractel tirak T 1000 Manuel D'installation Et De Manutention Original

Installation and operating manual
14

Transport and storage

14.1 Transport

General transporting instructions
Ensure that no damage occurs during the transporting.
Always use suitable transport equipment and get a second per-
son to help you with heavy components.
Hoist
– On-site, the hoist can be transported using the carrying
handle, see Fig. 1. If necessary transport with the help of a
second person.
– Heavy hoists can be transported using suitable transport
equipment on the eye bolts or ring nuts.
– Utilize the transport box when transporting with a vehicle.
Secure the hoist or the transport box with lashing straps.
Ropes
– Protect the ropes against direct sunlight, chemicals, soiling
and mechanical damage.
– Transport the ropes on the reels whenever possible.
– Rolled-up ropes without reels should be lifted and transport-
ed using a lifting strap.
– Minimize the load resulting from the dead weight as much
as possible.

14.2 Storage

General storage conditions:
Dry location (maximum of 75% relative humidity)

Dust-free

Even ambient temperature

Wire rope storage conditions:
Lightly greased

 Avoid contact with chemicals (e.g. battery acid)
 Store without any mechanical crushing, pressure or tensile
stress
EN-18
15

Maintenance work

15.1 Authorized maintenance personnel

DANGER!
Risk of falling! Risk of being injured by falling objects!
Danger of death due to incorrectly carried out maintenance or
service work!
Maintenance and service work which requires the product to
be opened may only be performed by the following authorized
parties:
– The TRACTEL Greifzug GmbH
– Lifting equipment service companies authorized by
TRACTEL Greifzug GmbH
– Service personnel trained and certified by TRACTEL
Greifzug GmbH

15.2 Mandatory inspections

A written certificate is required for the annual safety inspection
and any exceptional tests. The inspections must be recorded in
the logbook included with delivery.
Prior to every use
Always check to ensure that the device is in an orderly working
condition before use, see ' 9.4 Commissioning' on page 14.
Annual safety inspection
The safety inspection must be carried out annually.
The safety inspection may only be undertaken by authorized
maintenance personnel, see ' 15.1 Authorized maintenance per-
sonnel' on page 18. Depending on the usage conditions (e.g.
operation in an extremely dirty environment), an intermediate
inspection may be necessary.
When using rotation-resistant wire ropes:
The hoist's traction sheave might become prematurely worn, but
this depends on the application and the environmental conditions
(suspended load, dirt on the rope, etc.). The traction sheave
must be changed if it is found to be worn.
We recommend that the system is tested in our factory by
TRACTEL Greifzug GmbH.
General overhaul
The general overhaul periods are, at the latest (depending upon
which occurs first):
250 running hours for devices with 12 or 18 m/min rope

speeds,
500 running hours for devices with 6 or 9 m/min rope

speeds.
10 years after manufacture

G932.4 - 09/2015