Main Areas Of Application; Application; Coating Materials - Titan PowrLiner 2850 Mode D'emploi

MAIN AREAS OF APPLICATION

2
MAIN AREAS OF APPLICATION
2.1

APPLICATION

This airless line striper is a precision power tool used to spray
many types of material for many types of applications including
parking lots, curbs, and athletic fields.
Read and follow this instruction manual carefully for proper
operating instructions, maintenance, and safety information.
8
2.2

COATING MATERIALS

PROCESSIBLE COATING MATERIALS
Paints containing solvents, two-component coating materials,
dispersion and latex paints.
No other materials should be used for spraying without Titan's
approval.
Pay attention to the Airless quality of the coating
i
materials to be processed.
VISCOSITY
The unit is able to process coating materials with up to
20,000 mPas. If highly viscous coating materials cannot be
taken in or the performance of the unit is to low, the paint must
be diluted in accordance with the manufacturer's instructions.
Attention: Make sure, when stirring up with
i
motor-driven agitators that no air bubbles are
stirred in. Air bubbles disturb when spraying and
can, in fact, lead to interruption of operation.
COATING MATERIALS WITH ABRASIVE MATERIALS
These particles have a strong wear and tear effect on valves and
tips, but also on the spray gun. This impairs the durability of
these wearing parts considerably.
FILTERING
Sufficient filtering is required for fault-free operation. The unit
is equipped with a suction filter, an insertion filter in the spray
gun and a high pressure filter on the unit. Regular inspection
of these filters for damage or soiling is highly recommended.
PL2850