Internal Display - Nikon Forestry Pro Manuel D'utilisation

Internal display

En
1. 『 』- Target aiming/Laser irradiate system
De
『 』- Aim at the target. Position the target at the center of the reticle.
Fr
『
』 - Appears while the laser is being used for a measurement. (Remains present during single
measurement. Blinks during continuous measurements.)
Es
Warning: Do not look into the objective lenses when this mark is shown.
It
2． 『 』- Distance/measurement status display
Ru
Digitally indicates measured distance in meters/yards/feet and angles in degrees. Also indicates
measuring status such as "Measurement in progress", "Measurement unsuccessful" or "Unable to
No
measure. "
Se
<Examples of measurement results>
Fi
(Distance)
Display of results: ( ≧ 100m/yards/feet) e.g. 234 meters = 『
Nl
Display of results: ( ＜ 100m/yards/feet) e.g. 76.5 yards = 『
Dk
Display of results: ( ＜ 100m/yards/feet)
Ro
(Angle)
Pl
Display of results: ( ≦ -10˚and ≧ 10˚)
Hu
Cz Display of results: (-10˚＜ and ＜ 10˚)
『 』- Now measuring
『 』- Failure to measure or unable to measure distance
3. 『 』 Display Units
『 』Indicates distance being measured in meters.
『 』Indicates distance being measured in yards.
[No unit displayed] Indicates distance is measured in feet.
4. 『 』- Indicates battery condition. (See "Changing Batteries")
12
』
』
『 』
e.g. 82 feet =
』
e.g. 36˚ =『
』
e.g. -29˚ =『
』
e.g. 3.5˚ =『
』
e.g. -7.0˚ =『